Dell PowerEdge VRTX User Manual download pdf (Page 509)

PSU Event Messages

Message Unable to retrieve PSU

input voltage information.

Unable to retrieve input voltage information for the PSU specified in the message.

Response Action

Remove the PSU from the chassis, wait for two minutes, and reinsert it. If the issue persists,

contact your service provider.

Category Audit

SubCategory PSU = Power Supply

Severity Severity 2 (Warning)

Trap/EventID FALSE

LCD Message No LCD message display defined.

Initial Default. LC Log

IPMI Alert SNMP

LC Log LCD Power Off Power

FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE

Message The PSU in slot

detected 110 VAC input voltage and does not match chassis configuration.

The input voltage of the PSU specified in the message does not match the input voltage of the

PSUs already present in the chassis.

Response Action

Do the following: 1) Check the power configuration "Allow 110 VAC Operation" setting and make

sure it is enabled. 2) Check if the input voltage of all the PSUs are the same. 3) If the input

voltage of the PSU specified in the message is not the same, then remove the unmatched PSU.

Category Audit

SubCategory PSU = Power Supply

Dell PowerEdge VRTX User Manual Page 509