Back to Contents Page
TechnicalSpecifications:Dell™PowerVault™122TSDLT320AutoloaderUser'sGuide
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications
SDLT320DriveSpecifications
Media Specifications
60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader)
Native: 1.28 TB
Compressed: 2.56 TB (assuming 2:1 compression ratio)
Maximum data transfer rate
Native: 16 MB/s
Compressed: 32 MB/s (assuming 2:1 compression ratio)
LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector
10º to 35ºC (Wet bulb temp, 32ºC max)
–40º to 65ºC (Wet bulb temp, 40ºC max)
Recommended operating temperature
20º to 30ºC (Wet bulb temp, 30ºC max)
Temperature shock immunity—maximum rate of change
20% to 80% RH non-condensing
10% to 95% RH non-condensing
Maximum acceleration to operating
Read/write transfer rate: maximum sustained
Non-compressed mode: 16.0 MB/s
Compressed (2:1 typical): 32.0 MB/s
Loading time to BOT
(for previously written tape)
Low-Voltage Differential (LVD) Ultra 2 SCSI
Comments to this Manuals