Dell PowerVault 124T User Manual download pdf (Page 2)

Back to Contents Page

FrontPanelAdministration:Dell™PowerVault™124TLTO3-060 Autoloader User's

Guide

When you first power on the Dell PowerVault 124T LTO3-060 autoloader, it automatically runs a Power-On Self-Test (POST). During the POST, the left (green)

LED flashes. After the POST, the left (green) and right (amber) LED flash alternately back and forth. Do one of the following:

l If the autoloader powers on successfully, continue configuring the autoloader (see "Configuring the Autoloader").

l If the autoloader does not power on successfully, check the following:

¡ Power switch is on.

¡ Power cable is inserted correctly.

¡ SCSI bus is terminated.

¡ SCSI cable is connected to the autoloader and host computer.

¡ No error code appears on the autoloader LCD.

If you cannot resolve the problem yourself, contact your service representative or go to the Dell Support website at support.dell.com.

When you first power on the autoloader, the setting for the Internet Protocol (IP) address is static with the address 192.168.20.128. If you want to use

Dynamic Host Configuration Protocol (DHCP) to change the IP address, see "Setting the IP Address." To determine the IP address when using DHCP, view the

Ethernet status information (see "Viewing Ethernet Information").



Configuring the Autoloader

To configure the autoloader, start with the main menu on the front panel. If the main menu is not already visible on the LCD, press Enter.

When you first power on the autoloader, the default is set with no password protection. However, after you set the security option, all the configuration

functionality is password-protected. You need an administrator-level password to configure the autoloader.



The front panel menu has the following options:

Configuring the Autoloader

SCSI Barcode Length

Setting the SCSI ID

Setting Security

Setting Ethernet

Setting Magazines

Setting the Time

Setting Passwords

Barcode Reader



NOTE: The front panel requires a six-digit password to change the configuration (see "Setting Passwords"). The LCD front panel default

password for the Administrator is 000000. The default password for the Operator is 111111.

1 2 3 4 5 6 7 ... 55 56

Comments to this Manuals

No comments

Dell PowerVault 124T User Manual Page 2

Comments to this Manuals

Related products and manuals for Computer hardware Dell PowerVault 124T