Dell OptiPlex E1 User Manual Page 48
- Page / 88
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
11. Click OK to access the Copying Files dialog box, and then select 3Com Fast EtherLink/EtherLink XL PCI Bus-Master
NIC (3C905B-TX).
12. When prompted for diskette 2, click OK.
13. Click OK in the Insert Disk dialog box to access the Copying Files dialog box.
14. When you are prompted for the location of additional files, specify the c:\windows\options\cabs directory on your
hard-disk drive or the \win95 directory on your CD-ROM drive. Then click OK to access the System Properties
dialog box, and click OK again.
Windows 95 finishes copying all of the files to the system's hard-disk drive.
15. When the System Settings Change dialog box appears, remove the diskette from drive A and click Yes to restart
the system.
16. When the system restarts, the Enter Network Password dialog box appears. Enter the username and password you
want to use for network access.
See your Windows 95 documentation for information about usernames and passwords.
Windows for Workgroups NIC
To connect your system to, and configure it for use on, an Ethernet network, follow these steps:
1. Use the Program Diskette Maker (located in the Dell Accessories program group) to make a diskette copy of the NIC
drivers installed on your hard-disk drive.
2. Connect the network cable to the back of your computer.
See "
Network Cable Requirements" found earlier in this section for more information.
3. Verify that the NIC is enabled in the System Setup program.
See "
Using the System Setup Program," for more information.
4. Start Windows for Workgroups.
5. In the Main program group, double-click the Windows Setup icon.
6. Click Continue to access the Windows Setup screen.
7. Select Change Network Settings from the Options menu.
8. From the Network Setup window, click Networks. Then click Install Microsoft Windows Network, and click OK.
9. Click Drivers to access the Network Drivers dialog box.
10. Click Add Adapter to access the Add Network Adapter dialog box.
11. Select Unlisted or Updated Network Adapter, and click OK.
12. Insert diskette 1 into drive A, type a:\wfw311, and click OK.
13. In the Unlisted or Updated Network Adapter dialog box, select 3Com EtherLink XL/Fast EtherLink XL Adapter
(3C90x) and click OK.
14. In the Network Drivers dialog box, click Close.
15. In the Network Setup dialog box, enter the User Name, Workgroup Name, and Computer Name, and click OK.
16. Click Yes to All in the Windows Setup dialog box.
17. Click OK when a message is displayed on the screen stating that the system files are being updated.
18. If the Install Driver dialog box appears and prompts you for the el90x.386 driver, type a:\wfw311 and click OK to load
the Network Driver Interface Specification (NDIS) 3 driver.
If the Install Driver dialog box appears and prompts you for the el90x.dos driver, type a:\ndis2\dos and click OK to
load the NDIS 2 driver.
19. Click OK to have the operating system make backup copies of the system files.
20. Remove the diskette from drive A, save changes to any open files, and then click Restart Computer.
MS-DOS NIC
- System Features 2
- Hardware Features 3
- Dell OpenManage Program 5
- Wakeup On LAN 6
- Auto Power On 7
- Chassis Intrusion 7
- Passwords 7
- Using the Power Switch 8
- Energy Star Compliance 8
- Getting Help 10
- Overview 12
- System Setup Screen 13
- System Setup Categories 14
- System Date 15
- Hard-Disk Drive Sequence 17
- Boot Sequence 17
- Reserved Memory 18
- CPU Speed 18
- Integrated Devices 18
- System Memory 18
- Video Memory 18
- System Security 20
- Keyboard NumLock 21
- Asset Tag 23
- System Data Categories 24
- Responding to Error Messages 29
- OptiPlex 30
- E1 Managed 30
- About the ICU 31
- When to Run the ICU 32
- Preparing to Use the ICU 32
- Starting the ICU 33
- Adding a Listed Card 34
- Adding an Unlisted Card 37
- Modifying a Card 39
- Removing a Card 40
- Viewing Resources 40
- Exiting From the ICU 41
- Locking and Unlocking Cards 42
- Video Controller 44
- Audio Controller 44
- Network Cable Requirements 45
- Configuring the NIC 45
- Windows NT 3.5x NIC 46
- Windows 95 NIC 47
- Windows for Workgroups NIC 48
- MS-DOS NIC 48
- Before You Begin 50
- Removing the Computer Cover 51
- Replacing the Computer Cover 51
- Inside Your Computer 52
- Switches 54
- Expansion Cards 58
- Expansion Slots 59
- Installing an Expansion Card 59
- Removing an Expansion Card 61
- Adding Memory 62
- Performing a Memory Upgrade 63
- Adding Video Memory 65
- Replacing the System Battery 66
- Connecting Drives 69
- ICU Error Messages 81
- Could not 86
- Boot Device 88
Related products and manuals for Computers Dell OptiPlex E1
Computers Dell PowerEdge M805 User Manual
(808 pages)
(808 pages)
Computers Dell PowerEdge R410 User Manual
(10 pages)
(10 pages)
Computers Dell Dimension L___cx User Manual
(46 pages)
(46 pages)
Computers Dell OptiPlex Gxi User Manual
(126 pages)
(126 pages)
Computers Dell Dimension 4500S User Manual
(132 pages)
(132 pages)
Computers Dell OptiPlex GX270 User Manual
(38 pages)
(38 pages)
(2 pages)© 2020, manymanuals.com. All rights reserved. | 2.239 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals