Installing the I/O Board
1. Place the I/O board in its slot and snap it in place.
2. Tighten the screws to secure the I/O board.
3. Connect the I/O cable to the system board.
4. Install:
a) system board
b) display assembly
c) speaker
d) palmrest
e) base corner covers
f) WWAN card
g) WLAN card
h) memory
i) base cover
j) display-hinge cover
k) optical drive
l) keyboard
m) keyboard trim
n) hard drive
o) battery
p) express cage
q) SD card
5. Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) battery
b) keyboard trim
c) keyboard
d) hard drive
e) optical drive
f) display-hinge cover
g) base cover
h) base corner caps
i) power connector
j) palmrest assembly
3. Remove the antenna cables connected to wireless solutions from the routing channels.
38
Comments to this Manuals