Dell E6440 + Port Replicator Owner's Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 69
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
Option Description
Intel TurboBoost Allows you to enable or disable the Intel
TurboBoost mode of the processor.
Default Setting: Enable Intel TurboBoost
Hyper-Thread Control Allows you to enable or disable the
HyperThreading in the processor.
Default Setting: Enabled
Rapid Start Technology Allows you to set the rapid start time. The
option is set by default.
Table 8. Power Management
Option Description
AC Behavior Allows the computer to power-uon automatically, when AC adapter is plugged. The
option is disabled.
Wake on AC
Auto On Time Allows you to set the time at which the computer must turn on automatically. The
options are:
Disabled (Default Setting)
Every Day
Weekdays
Select Days - The system will power up on days selected above at the time
you specified.
NOTE: This feature does not work if you turn off your computer using the
switch on a power strip or surge protector or if Auto Power is set to disabled.
USB Wake Support Allows you to enable the USB devices to wake the computer from standby mode.
The option is disabled
Enable USB Wake Support
Wireless Radio Control Allows you to control the WLAN and WWAN radio. The options are:
Control WLAN radio
Control WWAN radio
Default Setting: Both the options are disabled.
Wake on LAN/WLAN This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting
and must be enabled in the operating system. This feature only works when the
computer is connected to AC power supply.
Disabled - Does not allow the system to power on by special LAN signals
when it receives a wake-up signal from the LAN or wireless LAN. (Default
Setting)
LAN Only - Allows the system to be powered on by special LAN signals.
WLAN Only
LAN or WLAN
LAN with PXE Boot
54
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 68 69

Comments to this Manuals

No comments