Dell OpenManage Server Administrator Version 6.1 User Manual Page 206
- Page / 298
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
206 Using the Storage Management Service
Complete Syntax
omconfig storage vdisk action=unmirror controller=
id vdisk=id
where id is the controller ID and virtual disk ID as reported by the omreport
command. To obtain these values, enter omreport storage controller to
display the controller IDs and then enter omreport storage vdisk controller=ID
to display the IDs for the virtual disks attached to the controller.
Example Syntax
To unmirror virtual disk 4 on controller 1, enter:
omconfig storage vdisk action=unmirror controller=1
vdisk=4
omconfig Assign Dedicated Hot Spare
Use the following omconfig command syntax to assign one or more physical
disks to a virtual disk as a dedicated hot spare.
NOTE: The PERC 2/SC, 2/DC, and CERC SATA 1.5/2s controllers do not support
dedicated hot spares.
Complete Syntax
omconfig storage vdisk action=
assigndedicatedhotspare controller=id vdisk=id
pdisk=<PDISKID> assign=yes
where id is the controller ID and virtual disk ID. The <PDISK> variable
specifies the physical disk.
To obtain the values for the controller, virtual disk, and physical disk, enter
omreport storage controller to display the controller IDs and then enter
omreport storage vdisk controller=ID and omreport storage pdisk
controller=ID to display the IDs for the virtual disks and physical disks
attached to the controller.
Example Syntax
In this example, you are assigning physical disk 3 on connector 0 of controller 1
as a dedicated hot spare to virtual disk 4. On a Serial Attached SCSI (SAS)
controller, the physical disk resides in enclosure 2.
- User's Guide 1
- Notes and Cautions 2
- Contents 3
- 4 Contents 4
- 6 Contents 6
- 10 Contents 10
- 12 Contents 12
- 14 Contents 14
- Introduction 15
- Command Prompts 17
- Primary CLI Commands 17
- Primary CLI 18
- Success Messages 19
- Failure Messages 19
- Command Syntax Overview 21
- Using the omhelp Command 23
- 26 Using the omhelp Command 26
- Commands 38
- Parameters Description 40
- index=n 46
- Server Administrator 52
- Commands for Viewing Logs 61
- Output Attributes Description 67
- Example Command Output 69
- System Attributes 71
- Memory Array 72
- Network Interface Card 73
- Storage Enclosures 73
- Privilege 78
- NOTE: This 82
- NOTE: You cannot 82
- Default Warning Thresholds 109
- NOTE: extipmiusergroup 120
- Command Result Description 129
- Defining Alert Actions 130
- Available Alert Actions 131
- Event Name Description 132
- Example Current Probe Actions 134
- Example Fan Probe Actions 134
- Commands for Clearing Logs 135
- Action Description 136
- Severity 140
- Example Recovery Commands 143
- Example Shutdown Commands 144
- Ownership Values 147
- Adding Lease Information 153
- Adding Outsource Information 156
- Adding Owner Information 157
- Adding Support Information 160
- Adding System Information 162
- Adding Warranty Information 163
- Using the Storage Management 165
- Command Elements 166
- Syntax Description 167
- Spare Protection Policy) 170
- Required Command 171
- Levels (1, 2, 3) 171
- Required Command Levels 172
- (1, 2, 3) 172
- NOTE: For SCSI controllers 174
- Required Command Levels (1 175
- 2, 3) and name=value pair 175
- NOTE: If a physical disk 177
- Replacing 177
- ° Celsius 179
- Complete Syntax 180
- Example Syntax 180
- For SAS Controllers 187
- Parameter Specification 189
- Description 189
- RAID 10) 191
- Required 200
- Command 200
- Optional name=value pairs 200
- ° Celsius, enter: 234
- Example for SAS Controllers 236
- List (lst) 241
- Table (tbl) 242
- Raw XML (xml) 243
- Custom Delimited Format (cdv) 244
- Glossary 245
- Glossary 247 247
- Glossary 249 249
- Glossary 251 251
- Glossary 253 253
- Glossary 255 255
- Glossary 257 257
- Glossary 259 259
- Glossary 261 261
- Glossary 263 263
- Glossary 265 265
- Glossary 267 267
- Glossary 269 269
- Glossary 273 273
- Glossary 275 275
- • Microprocessor 276
- • Various ROM chips 276
- Glossary 277 277
- • UpperThresholdFatal 277
- • UpperThresholdCritical 277
- • UpperThresholdNon-critical 277
- • Normal 277
- • LowerThresholdNon-critical 278
- • LowerThresholdCritical 278
- • LowerThresholdFatal 278
- Glossary 279 279
- Glossary 281 281
- Glossary 283 283
- 284 Glossary 284
- Index 285 285
- Index 287 287
- Index 289 289
- Index 291 291
- Index 293 293
- Index 295 295
- Index 297 297
- Index 298 298
Related products and manuals for NAS & storage servers Dell OpenManage Server Administrator Version 6.1
(80 pages)
NAS & storage servers Dell E03J User Manual
(86 pages)
(86 pages)
NAS & storage servers Dell NX400 Owner's Manual
(123 pages)
(123 pages)
© 2020, manymanuals.com. All rights reserved. | 0.504 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals