Dell PowerConnect 5212 Specifications Page 33
- Page / 110
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
The following table summarizes the equivalent CLI commands for items in the Switch/Firmware page.
Example
Console#copy tftp file
TFTP server ip address: 10.1.0.45
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: runtime
Destination file name: 0126.bix
/
Console#
Configuration
From the Configuration page you can save and restore switch configuration settings.
The Configuration page contains the following editable fields:
l Transfer Configuration to Server — Copies a switch configuration file to a TFTP server
l Transfer Configuration from Server — Copies a switch configuration file from a TFTP server
l Remove Configuration File — Deletes a configuration file from the switch (selected from the drop-down menu)
l Start-Up Configuration File — Selects the configuration file to be used after a system start-up (selected from the drop-down menu)
l Copy Running Config to File — Saves the current session configuration settings and specifies either a new filename or the name of an existing file to
be replaced
Transferring a Configuration File to a Server
1. In the Transfer Configuration File to Server field, enter the IP address of the TFTP server in the TFTP Server IP Address field.
2. In the Source File Name field, select the configuration file to upload from the drop- down menu.
3. For the Destination File Name, type a filename to identify the configuration file on the TFTP server.
4. Click Transfer to Server.
Transferring a Configuration File from a Server
Command
Usage
copy tftp file
Downloads a code image to the switch's flash memory from a TFTP server
boot system {boot-rom | config | opcode}: filename
Specifies the file or image used to start up the system
dir [boot-rom | config | opcode [:filename]]
Displays a list of files in flash memory
NOTE: You cannot upload and download Boot-ROM files to a TFTP server using the CLI. You must use a direct terminal connection to the switch's
console port and press <Ctrl><f> after the diagnostic test results. See "Downloading Firmware Through the Console Port."
NOTE: The switch is shipped with one default configuration file (Factory_Default_
Config.cfg) installed, which is set as the start-up file. This file cannot be removed from the system.
NOTICE: For configuration changes to persist beyond the current session, you must save the running-config file from this page, or use the CLI
command copy running-config startup-config.
- Introduction 2
- Front-Panel Components 3
- Back-Panel Descriptions 4
- Management 4
- Installation 6
- Connecting the Console Port 7
- Password Protection 7
- SNMP Settings 8
- IP Address Assignment 8
- Management Interface 11
- General Information 12
- Example 13
- CLI Commands 13
- Versions 16
- System Logs Configuration 18
- Remote Logs Configuration 20
- IP Address 22
- Security 24
- Authentication Settings 27
- Jumbo Frame 30
- Firmware Upgrade 31
- Configuration 33
- Port Configuration 36
- Trunk Configuration 38
- Broadcast Control 40
- Port Mirroring 41
- Port Security 42
- Address Table 44
- Dynamic Addresses 45
- Address Aging 46
- Spanning Tree 47
- Bridge Settings 48
- Advanced Bridge Settings 50
- Port and Trunk Settings 51
- VLAN Membership 53
- Removing VLAN Membership 54
- Port Settings 55
- Trunk Settings 57
- Class of Service 59
- Traffic Classes 60
- Queue Scheduling 62
- Layer 3/4 Priority 63
- IP Precedence 64
- DSCP Priority 64
- Link Aggregation 67
- Communities 69
- IP Filtering 71
- Multicast Support 72
- IGMP Member Port Table 74
- Statistics 77
- Utilization Summary 80
- Counter Summary 80
- VLANs and Frame Tagging 84
- VLAN Configuration 84
- Automatic VLAN Registration 85
- VLAN Examples 86
- Example 2 87
- Back to Contents Page 90
- Appendix 91
- Management VLAN Access 92
- Technical Specifications 95
- Getting Help 95
- Problems With Your Order 96
- Product Information 97
- Before You Call 97
- Contacting Dell 97
- Regulatory Notices 104
- IC Notice (Canada Only) 105
- CE Notice (European Union) 105
- VCCI Notice (Japan Only) 105
- General 107
- Rack Mounting of Systems 108
Related products and manuals for Network switches Dell PowerConnect 5212
Network switches Dell C300 Specifications
(74 pages)
(74 pages)
Network switches Dell M2401G User Manual
(27 pages)
(27 pages)
Network switches Dell S25P Specifications
(18 pages)
(18 pages)
Network switches Dell DF10MXL Specifications
(38 pages)
(38 pages)
Network switches Dell S25V Specifications
(26 pages)
(26 pages)
© 2020, manymanuals.com. All rights reserved. | 1.091 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals