Dell PowerConnect 5212 Specifications download pdf (Page 74)



Console(config)#exit



Console#show ip igmp snooping



Servicestatus:Enabled



Querierstatus:Enabled



Querycount:10



Queryinterval:100sec



Querymaxresponsetime:20sec



Routerportexpiretime:300sec



IGMPsnoopingversion:Version1



Console#

IGMP Member Port Table

You can use the IGMP Member Port Table page to assign ports that are attached to hosts that are supposed to receive a specific multicast service.

The following options are available:

l VLAN ID — Specifies the VLAN ID

l Multicast IP Address — Allows you to select or add the IP address for a specific multicast service

l New IP Address — Specifies the IP address of a new multicast service

l Port/Trunk Toggle Buttons — Allows you to select ports or trunks to receive the specified multicast service by toggling the value of the port/trunk

button:

¡ 'S' — Statically sets a port or trunk as a group member of the multicast service

¡ 'D' — Indicates that a port or trunk has been dynamically set as a group member of the multicast service

¡ 'BLANK' — Indicates that the port or trunk is not a group member of the multicast service



To save any changes you make in this page, click Apply Changes. If you don't want to save the changes, click Refresh.



NOTICE: You must set at least one port or trunk as a static member before you add a new multicast IP address. If you remove all static members from

a group, the IP address is also removed.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 109 110

Comments to this Manuals

No comments

Dell PowerConnect 5212 Specifications Page 74

Comments to this Manuals

Related products and manuals for Network switches Dell PowerConnect 5212