Dell PowerConnect 5212 Specifications Page 4
- Page / 110
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
l Green — An SFP transceiver is correctly installed in the slot and has a valid link on the port.
l Off — An SFP transceiver has no valid link on its port or is not installed in the slot.
Back-Panel Descriptions
The back panel of the system contains the AC power receptacle and the RPS connector.
AC Power Receptacle
The switch automatically adjusts its power setting to any supply voltage in the range of 90 to 240 V alternating current (VAC).
RPS Connector
Connect the optional RPS to the RPS connector. If the switch's internal power unit fails, the redundant power system automatically supplies power to the
switch for uninterrupted operation.
The switch supports the Dell PowerConnect RPS-600 external redundant power system.
Management
The following sections describe options for managing the switch.
Web-Based Interface
After you have successfully installed the switch, you can configure the switch, monitor the LED panel, and display statistics graphically using a web browser,
such as Netscape Navigator (version 6.2 and higher) or Microsoft®Internet Explorer (version 5.0).
Command-Line-Driven Console Interface Through a Serial Port or Telnet
You can also connect a computer or terminal to the serial console port or use Telnet to access the switch. The command-line-driven interface provides
complete access to all switch management features. Most of the common commands are described in "Management Interface." For a full list of commands, see
the Command Line Reference, which is included on the documentation CD.
SNMP-Based Management
You can manage the switch with an SNMP-compatible console program. The switch is compatible with SNMP version 1.0 and 2.0c.
The SNMP agent decodes the incoming SNMP messages and responds to requests with MIB objects stored in the database. The SNMP agent updates the MIB
objects every 5 seconds to generate statistics and counters.
The switch supports a comprehensive set of MIB extensions:
l RFC 1213 MIB II
l RFC 2863 Interfaces Evolution MIB
l RFC 2665 Ethernet-Like MIB
l RFC 1493 Bridge MIB
l RFC 2674 Extended Bridge MIB
l RFC 2819 RMON MIB
l RFC 2737 Entity MIB
l RFC 2618 RADIUS authentication client MIB
l Dell PowerConnect 5212 Private MIB
Back to Contents Page
NOTE: See the RPS-600 documentation for more information.
CAUTION: Do not use this switch with any redundant power system other than the Dell PowerConnect RPS-600.
NOTE: To access the switch through a web browser, the computer running the web browser must have IP-based network access to the switch.
- Introduction 2
- Front-Panel Components 3
- Back-Panel Descriptions 4
- Management 4
- Installation 6
- Connecting the Console Port 7
- Password Protection 7
- SNMP Settings 8
- IP Address Assignment 8
- Management Interface 11
- General Information 12
- Example 13
- CLI Commands 13
- Versions 16
- System Logs Configuration 18
- Remote Logs Configuration 20
- IP Address 22
- Security 24
- Authentication Settings 27
- Jumbo Frame 30
- Firmware Upgrade 31
- Configuration 33
- Port Configuration 36
- Trunk Configuration 38
- Broadcast Control 40
- Port Mirroring 41
- Port Security 42
- Address Table 44
- Dynamic Addresses 45
- Address Aging 46
- Spanning Tree 47
- Bridge Settings 48
- Advanced Bridge Settings 50
- Port and Trunk Settings 51
- VLAN Membership 53
- Removing VLAN Membership 54
- Port Settings 55
- Trunk Settings 57
- Class of Service 59
- Traffic Classes 60
- Queue Scheduling 62
- Layer 3/4 Priority 63
- IP Precedence 64
- DSCP Priority 64
- Link Aggregation 67
- Communities 69
- IP Filtering 71
- Multicast Support 72
- IGMP Member Port Table 74
- Statistics 77
- Utilization Summary 80
- Counter Summary 80
- VLANs and Frame Tagging 84
- VLAN Configuration 84
- Automatic VLAN Registration 85
- VLAN Examples 86
- Example 2 87
- Back to Contents Page 90
- Appendix 91
- Management VLAN Access 92
- Technical Specifications 95
- Getting Help 95
- Problems With Your Order 96
- Product Information 97
- Before You Call 97
- Contacting Dell 97
- Regulatory Notices 104
- IC Notice (Canada Only) 105
- CE Notice (European Union) 105
- VCCI Notice (Japan Only) 105
- General 107
- Rack Mounting of Systems 108
Related products and manuals for Network switches Dell PowerConnect 5212
Network switches Dell C300 Specifications
(74 pages)
(74 pages)
Network switches Dell M2401G User Manual
(27 pages)
(27 pages)
Network switches Dell S25P Specifications
(18 pages)
(18 pages)
Network switches Dell DF10MXL Specifications
(38 pages)
(38 pages)
Network switches Dell S25V Specifications
(26 pages)
(26 pages)
© 2020, manymanuals.com. All rights reserved. | 0.978 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals