Dell PowerConnect 8100 Series User Manual download pdf (Page 11)

11 SCG1001 PowerConnect 8100 Series Configuration Guide

console(config-if)#exit

console(config)#interface range fortygigabitethernet 1/1/1-2

console(config-if)#datacenter-bridging

console(config-if-dcb)#priority-flow-control mode on

console(conf-if-dcb)#priority-flow-control priority 4 no-drop

console(config-if-dcb)#exit

console(config-if)#switchport mode trunk

console(conf-if)#exit

console(config)#interface port-channel 1

console(config-if-Po1)#switchport mode trunk

console(config-if-Po1)#exit

3.5 Configure ETS values

console(config)#traffic-class-group weight 50 50 0

Note: This command is shown with 50% non-iSCSI traffic (first parameter) and 50% iSCSI traffic (second

parameter). The sum of the bandwidth-percentages must be equal to 100.

console(config)#exit

3.6 Save configuration

console# copy running-config startup-config

This operation may take a few minutes.

Management interfaces will not be available during this time.

Are you sure you want to save? (y/n)y

3.7 Configure additional switches

Repeat the commands from section 3 to configure DCB on additional switches.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

No comments

Dell PowerConnect 8100 Series User Manual Page 11