Dell PowerConnect W-IAP3WN/P User Manual Page 158

  • Download
  • Add to my manuals
  • Print
  • Page
    / 377
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 157
Figure 46 New Authentication Server Window
3. Configure any of the following types of server:
l RADIUS Server To configure a RADIUSserver, specify the attributes described in the following table:
Parameter Description
Name
Enter the name of the new external RADIUS server.
IP address
Enter the IP address of the external RADIUS server.
Auth port
Enter the authorization port number of the external RADIUS server. The default port
number is 1812.
Accounting port
Enter the accounting port number. This port is used for sending accounting records
to the RADIUS server. The default port number is 1813.
Shared key
Enter a shared key for communicating with the external RADIUS server.
Retype key Re-enter the shared key.
Timeout
Specify a timeout value in seconds. The value determines the timeout for one
RADIUS request. The W-IAP retries to send the request several times (as
configured in the Retry count), before the user gets disconnected. For example, if
the Timeout is 5 seconds, Retry counter is 3, user is disconnected after 20
seconds. The default value is 5 seconds.
Table 32:
RADIUSServer Configuration Parameters
Dell Networking W-Series Instant 6.4.0.2-4.1 | User Guide Authentication and User Management | 158
Page view 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 376 377

Comments to this Manuals

No comments