Dell PowerConnect W-IAP3WN/P User Manual download pdf (Page 80)

(Instant AP)(config)# end

(Instant AP)# commit apply

Configuring Terminal Access

When terminal access is enabled, you can access the Instant CLI through SSHor Telnet server. The terminal

access is enabled by default.

You can enable or disable terminal access to a W-IAP by using the Instant UI or CLI.

In the Instant UI

1. Navigate to System>General>Show advanced options.

2. Select Disabled or Enabled from the Terminal access drop-down list.

3. To enable Telnet server based access, select Enabled from the Telnet server drop-down list.

4. Click OK.

In the CLI

To enable terminal access:

(Instant AP)(config)# terminal-access

(Instant AP)(config)# end

(Instant AP)# commit apply

To enable access to the Instant CLI through Telnet:

(Instant AP)(config) # telnet-server

(Instant AP)(config)# end

(Instant AP)# commit apply

Configuring Console Access

You can access a W-IAP console through a serial port to configure or debug system errors. You can enable or

disable console access to a W-IAP through the Instant UI or CLI.

In the Instant UI

1. Navigate to System>General>Show advanced options.

2. Select Disabled or Enabled from the Console access drop-down list. By default, the console access is

enabled. When disabled, the W-IAP console cannot be accessed through the serial port.

3. Click OK.

In the CLI

To enable console access:

(Instant AP)(config)# console

(Instant AP)(console)# enable

(Instant AP)(console)# end

(Instant AP)# commit apply

To disable console access:

(Instant AP)(config)# console

(Instant AP)(console)# disable

(Instant AP)(console)# end

(Instant AP)# commit apply

To view the console settings:

(Instant AP)# show console-settings

Dell Networking W-Series Instant 6.4.0.2-4.1 | User Guide Initial Configuration Tasks | 80

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 376 377

No comments

Dell PowerConnect W-IAP3WN/P User Manual Page 80