Dell OpenManage Server Administrator Version 5.5 User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 262
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
omconfig: Managing Components Using the Instrumentation Service 79
omconfig chassis bmc/omconfig mainsystem bmc
NOTE: This command is phased-out in this release. It is replaced by the omconfig
chassis remoteaccess/omconfig mainsystem remoteaccess command.
omconfig chassis currents/omconfig mainsystem currents
NOTE: This command is no longer available through Server Administrator.
omconfig chassis fans/omconfig mainsystem fans
Use the omconfig chassis fans or omconfig mainsystem fans command to
set fan probe warning thresholds. As with other components, you can view
both warning and failure threshold values, but you cannot set failure
thresholds. Your system's manufacturer sets the minimum and maximum
failure thresholds.
attribute=speaker setting=on | off on: Enables the speaker.
off: Disables the speaker.
attribute=uausb setting=on | backonly |
off
on: Enables the user-accessible USB port(s)
backonly: Enables only the user accessible
USB port(s) located at the back of the system.
off: Disables the user-accessible USB port(s).
attribute=usb setting=enabled |
disabled
enabled: Enables the USB port(s).
disabled: Disables the USB port(s).
NOTE: Depending on your system’s hardware,
only one of the two attributes usb and usbb is
available for configuring the USB port(s).
attribute=usbb setting=enabled |
enabledwithbios|
disabled
enabled: Enables the USB port(s) during
system boot, without BIOS support.
enabledwithbios: Enables the USB port(s)
during the system boot, with BIOS support.
disabled: Disables the USB port(s) during
system boot.
NOTE: Depending on your system’s hardware,
only one of the two attributes usb and usbb is
available for configuring the USB port(s).
Table 4-3. BIOS Setup Settings
(continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 261 262

Comments to this Manuals

No comments