Dell OpenManage Server Administrator Version 6.0.1 User Manual download pdf (Page 200)

200 Using the Storage Management Service

omconfig Assign Global Hot Spare

Use the following omconfig command syntax to assign a physical disk as a

global hot spare.

Complete Syntax

omconfig storage pdisk action=assignglobalhotspare

controller=id pdisk=<PDISKID> assign=yes

where id is the controller ID. The <PDISK> variable specifies the

physical disk.

To obtain these values, enter omreport storage controller to display the

controller IDs and then enter omreport storage pdisk controller=ID to

display the IDs for the physical disks attached to the controller.

Example Syntax

In this example, you want to assign physical disk 3 on connector 0 of

controller 1 as a global hot spare. On a SAS controller, the physical disk

resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers

To assign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:3 assign=yes

Example for SAS Controllers

To assign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:2:3 assign=yes

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 276 277

No comments

Dell OpenManage Server Administrator Version 6.0.1 User Manual Page 200