212 Using the Storage Management Service
omconfig Set Enclosure Asset Tag
Use the following omconfig command syntax to specify the enclosure’s asset tag:
Complete Syntax
omconfig storage enclosure action=setassettag
controller=id enclosure=<ENCLOSUREID> assettag=
<string>
where id is the controller ID. The <ENCLOSUREID> variable specifies the
enclosure.
In this syntax, <string> is a user-specified alphanumeric string.
Example for SCSI, SATA, and ATA Controllers
To specify the asset tag to encl20 on the enclosure attached to connector 2 on
controller 1, enter:
omconfig storage enclosure action=setassettag
controller=1 enclosure=2 assettag=encl20
Example for SAS Controllers
To specify the asset tag to encl20 on enclosure 2 attached to connector 1 on
controller 1, enter:
omconfig storage enclosure action=setassettag
controller=1 enclosure=1:2 assettag=encl20
omconfig Set Enclosure Asset Name
Use the following omconfig command syntax to specify the asset name for an
enclosure.
Complete Syntax
omconfig storage enclosure action=setassetname
controller=id enclosure=<ENCLOSUREID> assetname=
<string>
where id is the controller ID. The <ENCLOSUREID> variable specifies the
enclosure.
In this syntax, <string> is a user-specified alphanumeric string.
Comments to this Manuals