Dell OpenManage Server Administrator Version 6.0.1 User Manual download pdf (Page 213)

Using the Storage Management Service 213

Example for SCSI, SATA, and ATA Controllers

To specify the asset name to encl43 for the enclosure attached to connector 2

on controller 1, enter:

omconfig storage enclosure action=setassetname

controller=1 enclosure=2 assetname=encl43

Example for SAS Controllers

To specify the asset name to encl43 for enclosure 2 attached to connector 1

on controller 1, enter:

omconfig storage enclosure action=setassetname

controller=1 enclosure=1:2 assetname=encl43

omconfig Set Temperature Probe Thresholds

Use the following omconfig command syntax to set the minimum and

maximum warning temperature thresholds for a specified temperature probe.

NOTE: This command is not supported on SAS controllers.

Complete Syntax

omconfig storage enclosure action=settempprobes

controller=id enclosure=<ENCLOSUREID> index=id

minwarn=n maxwarn=n

where id is the controller ID and the temperature probe ID. The

<ENCLOSUREID> variable specifies the enclosure.

In this syntax, “n” is a user-specified value for the temperature in Celsius.

Example Syntax

For example, you may want to specify the minimum and maximum warning

thresholds for temperature probe 3 to 10 and 40° Celsius.

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 276 277

No comments

Dell OpenManage Server Administrator Version 6.0.1 User Manual Page 213