Dell B1163/W Multifunction Mono Laser Printer User Manual download pdf (Page 113)

Wireless network setup

113

2. Using a Network-Connected Machine

Re-connecting to a network

When the wireless function is off, the machine automatically tries to re-connect

to the access point (or wireless router) with the previously used wireless

connection settings and address.

In the following cases, the machine automatically re-connects to the

wireless network:

• The machine is turned off and on again.

• The access point (or wireless router) is turned off and on again.

Canceling the connection process

To cancel the wireless network connection when the machine is connecting to

the wireless network, press and release the (Cancel or Stop/Clear) on the

control panel. You need to wait 2 minutes to re-connect to the wireless

network.

Disconnecting from a network

To disconnect the wireless network connection, press the (WPS) button on

the control panel for more than two seconds.

• When the Wi-Fi network is in idle mode: The machine is immediately

disconnected from the wireless network and the WPS LED turns off.

• When the Wi-Fi network is being used: While the machine waits until the

current job is finished, the light blinks fast on the WPS LED. Then, the

wireless network connection is automatically disconnected and the WPS

LED turns off.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 203 204

No comments

Dell B1163/W Multifunction Mono Laser Printer User Manual Page 113