Dell B1163/W Multifunction Mono Laser Printer User Manual Page 68

  • Download
  • Add to my manuals
  • Print
  • Page
    / 204
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 67
68
4. Troubleshooting
Understanding the status LED
The color of the LED indicates the machine's current status.
Some LEDs may not be available depending on model or country (see "Control panel overview" on page 19).
To resolve the error, look at the error message and its instructions from the troubleshooting part.
You also can resolve the error with the guideline from the computers’s Dell Printing Status (see "Using Dell Printer Status" on page 163 ).
If the problem persists, call a service representative.
LED Status Description
Status
Off The machine is off-line.
Green
Blinking When the backlight blinks, the machine is receiving or printing data.
On The machine is on-line and can be used.
Red
Blinking
A minor error has occurred and the machine is waiting for the error to be cleared. Check the display message. When the problem
is cleared, the machine resumes.
Small amount of toner is left in the cartridge. The estimated cartridge life
a
of toner is close. Prepare a new cartridge for
replacement. You may temporarily increase the printing quality by redistributing the toner (see "Redistributing toner" on page
51).
b
On
A toner cartridge has almost reached its estimated cartridge life
a
. It is recommended to replace the toner cartridge (see
"Replacing the toner cartridge" on page 53).
The cover is opened. Close the cover.
There is no paper in the tray when receiving or printing data. Load paper in the tray.
The machine has stopped due to a major error. Check the display message.
A paper jam has occurred (see "Clearing paper jams" on page 64).
Page view 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 203 204

Comments to this Manuals

No comments