Dell R210 II Owner's Manual download pdf (Page 80)

82 Installing System Components

Figure 3-11. Installing and Removing a Memory Module

Align the memory module's edge connector with the alignment key of the

memory module socket, and insert the memory module in the socket.

NOTE: The memory module socket has an alignment key that allows you to

install the memory module in the socket in only one way.

Press down on the memory module with your thumbs to lock the memory

module into the socket.

When the memory module is properly seated in the socket, the ejectors on

the memory module socket align with the ejectors on the other sockets

that have memory modules installed.

Repeat step 5 through step 8 of this procedure to install the remaining

memory modules. See

Ta b le 3 - 1

Replace the

cooling

shroud. See "Installing the Cooling Shroud" on

page 79.

Close the system. See "Closing the System" on page 63.

Start up the system, press <F2> to enter the System Setup program, and

check the

System Memory

setting on the main System Setup screen.

1 memory module 2 memory module socket ejectors (2)

3 alignment key

book.book Page 82 Wednesday, August 12, 2009 4:51 PM

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 143 144

No comments

Dell R210 II Owner's Manual Page 80