Dell PowerEdge R905 Owner's Manual Page 167

  • Download
  • Add to my manuals
  • Print
  • Page
    / 202
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 166
Troubleshooting Your System 167
6
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the problem persists, go to the next step.
7
Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
8
Open the system. See "Opening and Closing the System" on page 67.
9
Remove all expansion cards installed in the system. See "Removing an
Expansion Card" on page 83
10
Close the system. See "Opening and Closing the System" on page 67.
11
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
12
Run the appropriate online diagnostic test.
If the test fails, see
"Getting Help
" on page 181
.
13
For each expansion card you removed in step 9, perform the following
steps:
a
Turn off the system and attached peripherals, and disconnect the
system from the electrical outlet.
b
Open the system. See "Opening and Closing the System" on page 67.
c
Reinstall one of the expansion cards. See "Installing an Expansion
Card" on page 80.
d
Close the system. "Opening and Closing the System" on page 67.
e
Run the appropriate diagnostic test.
If the test fails, see
"Getting Help
" on page 181
.
Troubleshooting the Microprocessors
Problem
Error message indicates a processor problem.
Front-panel status LCD indicates a problem with the processors or system
board.
A heat sink is not installed for each processor.
Page view 166
1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 201 202

Comments to this Manuals

No comments