Dell PowerEdge R900 User Manual Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 190
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
84 Installing System Components
RAID Battery
Installing a RAID Battery
1
Insert the RAID battery into the battery carrier. See Figure 3-13.
2
Locate the battery carrier slots at the left of the processors.
3
Place the controller cabling harnesses between the battery carrier clips and
the chassis.
4
Insert the battery carrier and RAID battery into the chassis battery carrier
slots ensuring that the battery carrier is aligned and fully seated in the
slots.
5
Connect the battery cable to the SAS controller card.
1 SAS A connector 2 GND/+12V connector
3 SAS backplane 4 SAS B connector
5 Controller 0 connector 6 Controller 1 connector
7 System board 8 SATA_A connector (on system board)
9 SATA_A connector (on SAS
backplane)
10 Control panel connector
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 189 190

Comments to this Manuals

No comments