Dell POWEREDGE R610 User Manual download pdf (Page 122)

122 Installing System Components

If the value is incorrect, one or more of the memory modules may not be

installed properly. Repeat step 2 through step 10 of this procedure,

checking to ensure that the memory modules are firmly seated in their

sockets.

Run the system memory test in the system diagnostics. See "Running the

System Diagnostics."

Removing Memory Modules

CAUTION: Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your

product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered

by your warranty. Read and follow the safety instructions that came with the

product.

WARNING: The memory modules are hot to the touch for some time after the

system has been powered down. Allow time for the memory modules to cool

before handling them. Handle the memory modules by the card edges and avoid

touching the components on the memory module.

Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

Open the system. See "Opening the System."

Locate the memory module sockets. See Figure 6-1.

Press down and out on the ejectors on each end of the socket until the

memory module pops out of the socket. See Figure 3-18.

Handle each memory module only on either card edge, making sure not to

touch the middle of the memory module.

Close the system. See "Closing the System."

Processors

Removing a Processor

CAUTION: Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your

product documentation, or as directed by the online or telephone service and

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 183 184

No comments

Dell POWEREDGE R610 User Manual Page 122