Dell OpenManage Server Administrator Version 6.0.1 User Manual download pdf (Page 191)

Using the Storage Management Service 191

omconfig Format Virtual Disk

Use the following omconfig command syntax to format a virtual disk.

Complete Syntax

omconfig storage vdisk action=format controller=id

vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport

command. To obtain these values, enter omreport storage controller to display

the controller IDs and then enter omreport storage vdisk controller=ID to

display the IDs for the virtual disks attached to the controller.

Example Syntax

To format virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=format controller=1

vdisk=4

omconfig Reconfiguring Virtual Disks

You can reconfigure a virtual disk to change the virtual disk’s RAID level or

increase its size by adding physical disks. On some controllers, you can also

remove physical disks.

Complete Syntax

omconfig storage vdisk action=reconfigure

controller=id vdisk=id raid=<c| r0| r1| r1c| r5|

r6| r10> size=<size> pdisk=<PDISK>

Example Syntax

To reconfigure virtual disk 4 to a size of 800 MB, use RAID-5 and physical

disks 0 through 3 on connector 0 of controller 1. On a SAS controller, the

physical disks reside in enclosure 2.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 276 277

No comments

Dell OpenManage Server Administrator Version 6.0.1 User Manual Page 191