Dell PowerEdge M1000e Installation Manual download pdf (Page 15)

1-5

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide

OL-13269-01

Chapter 1 Product Overview

Other Features

Note The System LED (SYST), stack LED (STCK), Stack Master LED (MSTR), and Stack Member LED

(MMBR) are shown as item 9 in Figure 1-1 on page 1-2.

System LED

The System LED (SYST) shows whether the system is receiving power and is functioning properly.

Table 1-2 lists the LED colors and their meanings.

Stack LED (Only the CBS3130G-S and CBS3130X-S Switches)

To see the status of the StackWise Ports, press the Mode button. The stack LED (STCK) is green when

the Stackwise Plus ports are up and amber when the ports are down. The 10-Gigabit Ethernet module

slot LEDs 23 and 24 show the status for Stackwise Plus ports 1 and 2, respectively (see items 4 and 6 in

Figure 1-1 on page 1-2).

When in stack mode, if both 10-Gigabit Ethernet uplink port LEDs are green, the stack is operating at

full bandwidth. If one or both of the 10-Gigabit uplink LEDs are not green, the stack is not operating at

full bandwidth.

Stack Master LED (Only the CBS3130G-S and CBS3130X-S Switches)

The Stack Master LED (MSTR) shows the stack master status. Table 1-3 lists the LED colors and their

meanings. (Only the CBS3130G-S and CBS3130X-S switches.)

Ta b l e 1-2 System LED

Color System Status

Off System is not powered on.

Blinking green POST is in progress.

Solid green System is operating normally.

Amber System is receiving power but is not functioning properly.

Ta b l e 1-3 Stack Master LED

Color Description

Off Switch is not the stack master.

Green Switch is the stack master or a standalone switch.

Amber An error occurred during stack master election or another type of stack error

occurred.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

No comments

Dell PowerEdge M1000e Installation Manual Page 15