Dell PowerEdge M1000e Installation Manual download pdf (Page 29)

2-9

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide

OL-13269-01

Chapter 2 Switch Installation

Configuring the Switch

Connecting through the CMC

Follow these steps when connecting through the CMC:

Step 1 Connect one end of a DB-9 null-modem or crossover cable to the RS-232 console serial port of the CMC.

Connect the other end of the cable to the RS-232 console serial port of the PC.

Step 2 On the PC terminal emulation program:

a. Set the data format to 8 data bits, 1 stop bit, and no parity.

b. Set the terminal emulation speed to 115200 baud.

c. Set Flow Control to none.

d. Under Properties, select VT100 for Emulation mode.

e. Select Terminal keys for Function, Arrow, and Ctrl keys. Ensure that the setting is for Terminal keys

(not Windows

keys).

When using HyperTerminal with Microsoft Windows 2000, ensure that you have Windows 2000 Service

Pack 2 or later installed. With Windows 2000 Service Pack

2, the arrow keys function properly in the

HyperTerminal VT100 emulation. Go to

www.microsoft.com for information on Windows 2000 service

packs.

Step 3 On the console monitor, the CMC application displays a login screen. Log in by using these defaults:

username root

password calvin

The CMC command-line interface (CLI) command prompt CMC: appears.

Note If the server chassis is off, use this command to power it on:

racadm chassisaction -m chassis powerup

The switch inserted into the chassis I/O bay automatically powers on when the server chassis

powers on. For more information on configuring the server chassis by using the CLI, see the Dell

Remote Access Controller/Modular Chassis User's Guide.

Power-cycle the switch by using this command:

racadm chassisaction -m switch-N powercycle

where N is the chassis I/O module bay number in which the switch is inserted.

Module Bay Substitute for

A1 1

A2 2

B1 3

B2 4

C1 5

C2 6

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

No comments

Dell PowerEdge M1000e Installation Manual Page 29