Dell C1765NF MFP Laser Printer User Manual download pdf (Page 272)

270 Faxing

Available Fax Settings Options

You can use the following settings options for configuring the fax system:

Option Description

Receive Mode Telephone Automatic fax reception is turned off. You can receive a fax by picking up the

handset of the external telephone, and then pressing the remote receive code.

Fax Automatically receives faxes.

Telephone/Fax When the printer receives an incoming fax, the external telephone rings for

the time specified in Auto Rec TEL/FAX, and then the printer automatically

receives a fax. If an incoming call is not a fax, the printer beeps from the

internal speaker indicating that the call is a telephone call.

Ans Machine/Fax The printer can share a telephone line with an answering machine. In this

mode, the printer will monitor the fax signal and pick up the line if there are

fax tones. If the phone communication is using serial transmission in your

country (such as Germany, Sweden, Denmark, Austria, Belgium, Italy, France

and Switzerland), this mode is not supported.

DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a

distinctive ring service must be installed on your telephone line by the

telephone company. After the telephone company has provided a separate

number for faxing with a distinctive ring pattern, configure the fax setup to

monitor for that specific ring pattern.

Auto Rec Fax Sets the interval at which the printer goes into the fax receive mode after receiving an incoming call.

Auto Rec TEL/FAX Sets the interval at which the printer goes into the fax receive mode after the external telephone

receives an incoming call.

Auto Rec Ans/FAX Sets the interval at which the printer goes into the fax receive mode after the external answering

machine receives an incoming call.

Line Monitor Sets the volume of the line monitor, which audibly monitors a transmission through the internal

speaker until a connection is made.

Ring Tone Volume Sets the volume of the ring tone, which indicates that an incoming call is a telephone call through the

internal speaker when Receive Mode is set to Telephone/Fax.

Line Type Sets the line type.

Tone/Pulse Sets the dialing type.

Resend Delay Specifies the interval between transmission attempts.

Redial Attempts Specifies the number of redial attempts to make when the destination fax number is busy. If you enter

0, the printer will not redial.

Redial Delay Specifies the interval between redial attempts.

Junk Fax Setup Sets whether to reject faxes sent from unwanted numbers by accepting faxes only from the fax

numbers registered in the Phone Book.

Remote Receive Sets whether to receive a fax by pressing a remote receive code on the external telephone.

Remote Rcv Tone Specifies the remote receive code in two digits to start Remote Receive.

Fax Header Sets whether to print the information of sender on the header of faxes.

Fax Header Name Sets the name of sender to be printed on the header of faxes. Up to 30 alphanumeric characters can be

entered.

Fax Number Sets the fax number of the printer to be printed on the header of faxes.

Fax Cover Page Sets whether to attach a cover page to faxes.

DRPD Pattern Sets the DRPD setting from Pattern 1 to Pattern 7. DRPD is a service provided by some telephone

companies.

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 375 376

Comments to this Manuals

No comments

Dell C1765NF MFP Laser Printer User Manual Page 272

Comments to this Manuals

Related products and manuals for Printers Dell C1765NF MFP Laser Printer