Dell PowerEdge C6100 Owner's Manual download pdf (Page 79)

Installing System Components 79

NOTE: An empty DIMM socket is marked as “_”. For best performance, all the

memory modules installed must be of the same speed, capacity, and from the same

manufacturer.

Removing Memory Modules

WARNING: The memory modules are hot to the touch for some time after the

system has been powered down. Allow time for the memory modules to cool

before handling them. Handle the memory modules by the card edges and avoid

touching the components on the memory module.

CAUTION: Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized in

your product documentation, or as directed by the online or telephone service

and support team. Damage due to servicing that is not authorized by Dell is not

covered by your warranty. Read and follow the safety instructions that came

with the product.

Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

Remove the system-board assembly. See "Removing a System-Board

Assembly" on page 61.

Remove the cooling shroud. See "Removing the Cooling Shroud" on

page 63.

Locate the memory module sockets. See Figure 3-15.

6  –  –  –

12   

Processor 1

CH A CH B CH C

1– – – – – –

4  –  –– –

6  –  –  –

12   

Table 3-2. Memory Module Configurations

DIMM DIMM0 DIMM1 DIMM0 DIMM1 DIMM0 DIMM1

book.book Page 79 Thursday, March 4, 2010 4:38 PM

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 159 160

No comments

Dell PowerEdge C6100 Owner's Manual Page 79