Dell Multifunction Laser Printer 5535dn Service Manual download pdf (Page 36)

100

101

2-4 Service Manual

35 Res Save Off

Deficient Memory

This IR is displayed when the

printer lacks sufficient memory

to enable Resource Save. This

message usually indicates the

user has allocated too much

memory for one or more of the

printer's link buffers; however,

modification of other printer

settings which affect the

amount of available memory

may also create this condition.

If the user desires to enable

Resource Save after this

message has been posted, it is

recommended the user either

install additional memory or set

each link buffer back to the

Auto value.

Once all link buffers are

returned to Auto, the user

should exit the menus to

activate the link buffer

changes. Once the printer

returns to the Ready state, the

user may then enable

Resource Save and then finally

go back and modify the link

buffers again. The user should

note the reduction of available

memory to the link buffers

when Resource Save has been

enabled as opposed to the

memory available when

Resource Save is disabled.

This message displays when

the printer lacks sufficient

memory to enable Resource

Save. This message usually

indicates the user has

allocated too much memory for

one or more of the printer link

buffers; however, modification

of other printer settings which

affect the amount of available

memory may also create this

condition. If restoration of

Resource Save is required

after this message is received,

the customer should install

additional memory or set each

link buffer to Auto. Once all link

buffers are returned to Auto,

you should exit the menu to

activate the link buffer

changes. Once the printer

returns to the Ready state, you

can enable Resource Save and

go back and modify the link

buffers again. Note the

reduction of available memory

to the link buffers when

Resource Save has been

enabled, and compare it to the

memory available when

Resource Save is disabled.

• Press to disable

Resource Save and

continue printing.

To enable Resource Save

after you get this message:

- Make sure the link

buffers are set to Auto,

then exit the menus to

activate the link buffer

changes.

- When Ready is

displayed, enable

Resource Save.

• Install additional memory.

37A Insufficient Collation

Area

This message displays when

the printer memory is

insufficient to perform the Flash

Memory Defragment operation.

Note: This message is posted

prior to the actual start of the

defragment operation. The

printer code determines if

enough printer memory is

available to complete the

defragment operation. The

user should not be concerned

with losing resources stored in

the flash option.

The following actions may be

taken:

• Press to clear the

message. To perform the

defragment operation:

- Delete fonts, macros,

and other data in RAM.

- Install additional printer

memory.

• Press until Busy/

Waiting appears. The

following actions are

available:

- Cancel Job

- Reset Printer

- Reset Active Bin

Error

code or

message

Error contents Description/Action Possible repair actions

1 ... 35 36 37 ... 657

Comments to this Manuals

No comments

Dell Multifunction Laser Printer 5535dn Service Manual Page 36

Comments to this Manuals

Related products and manuals for Print & Scan Dell Multifunction Laser Printer 5535dn