Dell POWEREDGE 1855 User Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
11. If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 1 through step 10 of this procedure, checking to
ensure that the memory modules are firmly seated in their sockets.
12. Run the system memory test in the system diagnostics. See "Running System Diagnostics."
Removing Memory Modules
1. Remove the server module. See "Removing a Server Module."
2. Open the server module. See "Opening the Server Module."
3. Locate the memory module sockets. See FigureA-3.
4. Press down and out on the ejectors on each end of the socket until the memory module pops out of the socket. See Figure6-16.
5. Close the server module. See "Closing the Server Module."
6. Install the server module. See "Installing a Server Module."
Daughter Card
The server module board daughter-card connectors support a variety of dual-channel I/O module daughter cards. Each type of daughter card must be used in
conjunction with its appropriate back-panel I/O module and connector number. For example, server module number 5 must have a Fibre Channel daughter
card installed to communicate with the Fibre Channel pass-through module connector number 5 (primary and secondary bays).
Installing a Daughter Card
1. Remove the server module. See "Removing a Server Module."
2. Open the server module. See "Opening the Server Module."
3. Align the three screw holes on the daughter card with the three standoffs on the server module board. See Figure6-17.
4. Align the connectors on the bottom of the daughter card with the connectors on the server module board, and then press down on the card edges until
it is fully seated.
5. Secure the daughter card to the server module board with the three screws.
6. Close the server module. See "Closing the Server Module."
7. Install the server module. See "Installing a Server Module."
Figure 6-17. Installing and Removing a Daughter Card
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTICE: Hold the daughter card by its edges only.
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 77 78

Comments to this Manuals

No comments