Dell POWEREDGE 1855 User Manual Page 62

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 61
3. Loosen the four screws that secure the heat sink to the server module board. See Figure6-18.
Figure 6-18. Installing and Removing the Heat Sink
4. Remove the heat sink:
a. Slightly rotate the heat sink to loosen it from the processor.
b. If the processor is removed from the socket with the heat sink, twist or slide the processor off of the heat sink. Do not pry the processor off of
the heat sink.
c. Set the heat sink on its top so as not to contaminate the thermal grease.
5. Pull the socket-release lever straight up until the processor is released from the socket. See Figure6-19.
Figure 6-19. Installing and Removing the Processor
6. Lift the processor out of the socket and leave the release lever up so that the socket is ready for the new processor.
Installing the Processor
1. Unpack the new processor.
CAUTION: The processor and heat sink can become extremely hot. Be sure the processor has had sufficient time to cool before handling.
NOTICE: Never remove the heat sink from a processor unless you intend to remove the processor. The heat sink is necessary to maintain proper
thermal conditions.
NOTE: When removing the heat sink, the possibility exists that the processor might adhere to the heat sink and be removed from the socket. It is
recommended that you remove the heat sink while the processor is still warm.
NOTICE: Be careful not to bend any of the pins when removing the processor. Bending the pins can permanently damage the processor.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as
authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Page view 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 77 78

Comments to this Manuals

No comments