Dell Latitude C800 User Manual download pdf (Page 26)

Confirming the System Configuration Information

When you boot your computer from your ResourceCD, the diagnostics checks your system configuration information and displays it in the Device

Groups area on the main screen.

The following sources supply this configuration information for the diagnostics:

l The system configuration information settings (stored in nonvolatile random-access memory [NVRAM]) that you selected while using the

system setup program

l Identification tests of the microprocessor, the video controller, the keyboard controller, and other key components

l Basic input/output system (BIOS) configuration information temporarily saved in RAM

Do not be concerned if the Device Groups area does not list the names of all the components or devices you know are part of your computer. For

example, you may not see a printer listed, although you know one is attached to your computer. Instead, the printer is listed as a parallel port. The

computer recognizes the parallel port as LPT1, which is an address that tells the computer where to send outgoing information and where to look

for incoming information. Because your printer is a parallel communications device, the computer recognizes the printer by its LPT1 address and

identifies it as a parallel port. You can test your printer connection in the Parallel Portstests.

Back to Contents Page

inclusively, and second, seeking alternately from the beginning to ending cylinders with

convergence towards the middle.

Versions

Lists the version numbers of the subtests that are used by the Dell Diagnostics.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 103 104

No comments

Dell Latitude C800 User Manual Page 26