Dell OpenManage Server Administrator Version 5.5 User Manual download pdf (Page 110)

110 omconfig: Managing Components Using the Instrumentation Service

omconfig system events/omconfig servermodule events

Use the omconfig system events or omconfig servermodule events command

to enable and disable SNMP traps for the components on your system.

NOTE: Not all event types may be present on your system.

There are four parameters in the name=value pair component of the

omconfig system events command:

•Source

•Type

• Severity

•Index

Source

At present, source=snmptraps is a required name=value pair because

SNMP is currently the only supported source of event notification for your

system’s components.

omconfig system events source=snmptraps

omconfig servermodule events source=snmptraps

event=tempfail Sets action or enables/disables alert generation when a temperature

probe detects that the temperature is either too high or low for

proper operation.

event=voltfail Sets action or enables/disables alert generation when a voltage probe

detects that the voltage is too low for proper operation.

event=watchdogasr Enables or disables alert generation configured by the ASR when the

system has hung or is not responding.

Table 4-24. omconfig system platformevents

(continued)

Event Name Description

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 261 262

No comments

Dell OpenManage Server Administrator Version 5.5 User Manual Page 110