Dell OpenManage Server Administrator Version 5.5 User Manual download pdf (Page 167)

Using the Storage Management Service 165

omconfig Blink Virtual Disk

Use the following omconfig command syntax to blink the physical disks

included in a virtual disk.

Complete Syntax

omconfig storage vdisk action=blink controller=id

vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport

command. To obtain these values, enter omreport storage controller to

display the controller IDs and then enter omreport storage vdisk controller=ID

to display the IDs for the virtual disks attached to the controller.

Example Syntax

To blink the physical disks in virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=blink controller=1

vdisk=4

omconfig Unblink Virtual Disk

Use the following omconfig command syntax to unblink the physical disks

included in a virtual disk.

Complete Syntax

omconfig storage vdisk action=unblink controller=

id vdisk=id

where id is the controller ID and virtual disk ID as reported by the omreport

command. To obtain these values, enter omreport storage controller to

display the controller IDs and then enter omreport storage vdisk controller=

ID to display the IDs for the virtual disks attached to the controller.

Example Syntax

To blink the physical disks in virtual disk 4 on controller 1, enter:

omconfig storage vdisk action=unblink controller=1

vdisk=4

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 261 262

No comments

Dell OpenManage Server Administrator Version 5.5 User Manual Page 167