Dell OpenManage Server Administrator Version 5.5 User Manual Page 85
- Page / 262
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
omconfig: Managing Components Using the Instrumentation Service 85
Table 4-9 shows the valid parameters for the command.
omconfig chassis pwrmonitoring/omconfig mainsystem pwrmonitoring
Use the omconfig chassis pwrmonitoring or omconfig mainsystem
pwrmonitoring command to configure power consumption information.
NOTE: This command is applicable to selected Dell xx0x systems that supports
PMBus only.
Table 4-9. omconfig chassis memorymode/omconfig mainsystem memorymode
name=value pair 1 Description
index=<n> Number of the chassis where the memory module resides (the default is
chassis 0, the main system chassis).
redundancy=spare |
mirror | disabled |
raid5
Spare disables the memory module that has a correctable memory event
and copies the failing module’s data to a spare bank.
Disabled indicates that the system is not to use other available memory
modules if uncorrectable memory events are detected.
Mirror switches the systems to a mirrored copy of the memory if the
failing module has an uncorrectable memory event. In the mirror mode,
the operating system does not switch back to the original module until
the system reboots.
RAID-5 is a method of system memory configuration. This is logically
similar to the RAID-5 mode used in hard drive storage systems. This
memory mode provides an extra level of memory checking and error
recovery at the expense of some memory capacity. The RAID mode
supported is RAID level 5 striping with rotational parity.
Table 4-10. omconfig chassis pwrmonitoring/omconfig mainsystem pwrmonitoring
name=value pair 1 name=value pair 2 Description
index=<n> NA Number of the probe or probe index
(must be specified).
config=probe NA Sets the threshold value for the power
consumption probe.
warnthresh=settodefault NA Sets minimum and maximum warning
thresholds values to default.
warnthresh=<n> NA Sets a value for the warning threshold.
config=resetreading type=energy | peakpower energy: Resets the system energy reading.
peakpower: Resets the system peak power.
- Dell™ OpenManage™ 1
- Command Line Interface 1
- User's Guide 1
- Notes and Notices 2
- Contents 3
- 4 Contents 4
- 6 Contents 6
- 8 Contents 8
- 10 Contents 10
- 12 Contents 12
- 14 Contents 14
- Introduction 15
- Primary CLI Commands 16
- Success Messages 18
- Failure Messages 19
- Command Syntax Overview 21
- <n> signauth=< 22
- Using the omhelp Command 23
- Using the omhelp Command 25 25
- 26 Using the omhelp Command 26
- <command level 2> -? 32
- index=n 41
- Commands for Viewing Logs 52
- <component name> 57
- Example Command Output 60
- Processor 61
- Memory Array 62
- Firmware 62
- Network Interface Card 63
- Storage Enclosures 63
- Modular system 65
- Non-modular system 65
- Default Warning Thresholds 86
- NOTE: extimpiusergroup 95
- Defining Alert Actions 102
- Available Alert Actions 103
- (continued) 104
- Example Current Probe Actions 105
- Commands for Clearing Logs 106
- Severity 111
- Example Recovery Commands 113
- Example Shutdown Commands 114
- Ownership Values 117
- Adding Lease Information 122
- Adding Outsource Information 125
- Adding Owner Information 126
- Adding Support Information 128
- Adding System Information 129
- Adding Warranty Information 131
- Using the Storage Management 133
- Command Elements 134
- Commands 138
- NOTE: If a physical disk was 144
- Replacing 144
- ° Celsius 146
- Example Syntax 147
- Complete Syntax 147
- For SAS Controllers 153
- Table 6-18. Size Parameter 155
- RAID 10) 157
- Example for SAS Controllers 173
- ° Celsius, enter: 199
- List (lst) 205
- Table (tbl) 206
- Raw XML (xml) 207
- Custom Delimited Format (cdv) 208
- Glossary 209
- Glossary 209 211
- Glossary 211 213
- Glossary 213 215
- Glossary 215 217
- Glossary 217 219
- Glossary 219 221
- Glossary 221 223
- Glossary 223 225
- Glossary 225 227
- Glossary 227 229
- Glossary 229 231
- Glossary 231 233
- Glossary 235 237
- Glossary 237 239
- •Microprocessor 240
- •Various ROM chips 240
- Glossary 239 241
- • UpperThresholdFatal 241
- • UpperThresholdCritical 241
- • UpperThresholdNon-critical 241
- • LowerThresholdNon-critical 242
- • LowerThresholdCritical 242
- • LowerThresholdFatal 242
- Glossary 241 243
- Glossary 243 245
- Glossary 245 247
- 246 Glossary 248
- Index 247 249
- Index 249 251
- Index 251 253
- Index 253 255
- Index 255 257
- Index 257 259
- Index 259 261
- 260 Index 262
Related products and manuals for NAS & storage servers Dell OpenManage Server Administrator Version 5.5
(80 pages)
NAS & storage servers Dell E03J User Manual
(86 pages)
(86 pages)
NAS & storage servers Dell NX400 Owner's Manual
(123 pages)
(123 pages)
© 2020, manymanuals.com. All rights reserved. | 1.168 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals