Dell PowerEdge M1000e Installation Manual Page 54
- Page / 72
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
3-5
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Hardware Installation Guide
OL-13269-01
Chapter 3 Troubleshooting
Replacing a Failed Stack Member
Caution This procedure clears the IP address and all configuration information stored on the switch. Do not
follow this procedure unless you want to completely reconfigure the switch.
To reset the switch:
1. At the switch prompt, enter enable, and press Return or Enter.
2. At the Privileged EXEC prompt, switch#, enter setup and press Return or Enter.
The switch displays the prompt to run the initial configuration dialog. The switch now behaves like an
unconfigured switch.
Replacing a Failed Stack Member
If you need to replace a failed stack member, you can hot swap or replace the switch by following this
procedure:
1. Get a replacement switch that has the same model number as the failed switch.
2. Remove the failed switch.
3. Install the replacement switch in the blade server.
If you manually set the member numbers for any members in the stack, you need to manually assign
the replacement switch with the same member number as the failed switch. To
manually assign the
member number, install the replacement switch and wait for it to boot up. Use the CLI to manually
assign the member number (see the software configuration guide for instructions) before you
connect the switch to the stack.
4. Connect the switch to the stack.
5. Reinstall any transceiver modules and cable connections.
6. Make the same Gigabit Ethernet connections on the replacement switch that were on the failed
switch.
7. Power on the replacement switch.
The replacement switch will have the same configuration for all the interfaces as the failed switch and
will function the same as the failed switch.
Locating the Switch Serial Number
If you contact Cisco Technical Assistance, you need to know the serial number of your switch. Use these
figures to locate the serial number on your switch. You can also use the show version command to get
the serial number.
• “Serial Number Location on the Cisco Catalyst Blade Switch 3130 for Dell”
• “Serial Number Location on the Cisco Catalyst Blade Switch 3032 for Dell”
- Hardware Installation Guide 1
- CONTENTS 3
- 3 Troubleshooting 3-1 4
- Contents 5
- Audience 7
- Organization 7
- Conventions 8
- Related Publications 8
- OL-13269-01 10
- Product Overview 11
- Port Descriptions 12
- Other Features 13
- Other Features 14
- System LED 15
- RJ-45 Uplink Port LEDs 16
- System Status/ID LED 16
- Converter Module Installed 17
- LED Behavior in Stack Mode 17
- Management Options 18
- Using the Dell CMC 19
- Network Configurations 20
- Switch Installation 21
- Safety Warnings 22
- Configuring the Switch 27
- Configuring the Switch 28
- Connecting through the CMC 29
- Waiting for POST to Complete 30
- Step 10 These choices appear: 32
- Figure 2-5 Express Setup Page 33
- Managing the Switch 35
- Using the Device Manager 36
- Other Management Options 36
- 3130X-S Switches) 37
- Stack Cabling Configurations 38
- Removing a Module 44
- Installing SFP Modules 45
- Removing an SFP Module 46
- Where to Go Next 47
- • Using SNMP 48
- • Using the Dell CMC 48
- Where to Go Next 49
- Troubleshooting 50
- Look at the Switch LEDs 51
- SFP Module Port Issues 52
- Port and Interface Settings 52
- Ping the End Device 52
- Spanning Tree Loops 52
- Verify the Switch Performance 53
- 250405, 781-00519-01 A0 55
- Technical Specifications 57
- Connector Specifications 59
- 231 45678Pin Label 60
- Console Port 62
- Identifying a Crossover Cable 66
- Console Port Adapter Pinouts 66
- Signal DB-25 Pin Signal 67
- Numerics 69
Related products and manuals for Network switches Dell PowerEdge M1000e
Network switches Dell 6505 Datasheet
(4 pages)
(4 pages)
Network switches Dell 3130 Datasheet
(13 pages)
(13 pages)
Network switches Dell 13577416 Datasheet
(3 pages)
(3 pages)
Network switches Dell S55 Specifications
(50 pages)
(50 pages)
Network switches Dell S60 Installation Guide
(28 pages)
(28 pages)
Network switches Dell M6348 User's Guide
(158 pages)
(158 pages)
Network switches Dell M6220 User's Guide
(27 pages)
(27 pages)
© 2020, manymanuals.com. All rights reserved. | 0.519 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals