Action
1. Re-enter the time and date through the System Setup program. See "Using the System Setup Program" in your User's Guide.
2. Turn off the system and disconnect it from the electrical outlet for at least one hour.
3. Reconnect the system to the electrical outlet and turn on the system.
4. Enter the System Setup program.
If the date and time are not correct in the System Setup program, replace the battery. See "System Battery" in "Installing System Components."
If the problem is not resolved by replacing the battery, see "Getting Help."
Troubleshooting a Power Supply
Problem
l No power to the system.
l Power indicator on the front panel does not light.
Action
1. Run the appropriate online diagnostics test. See "Using Server Administrator Diagnostics" in "Running the System Diagnostics."
2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
3. Open the system. See "Opening the System."
4. Ensure that the power cables are properly connected to the power connectors on the system board and backplane (if installed). To identify the system
board power connectors, see FigureA-3.
5. Close the system. See "Closing the System."
6. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
If the problem persists, see "Getting Help."
Troubleshooting System Cooling Problems
Problem
l A cooling fan is not operating properly.
l System status indicator is amber.
l Systems management software issues a fan-related error message.
Action
Comments to this Manuals