Dell R430 Owner's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 155
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
Option Description
Name Displays the name of the Host, Model, or User String for the system.
Number Displays the Asset tag or the Service tag for the system.
Power Displays the power output of the system in BTU/hr or Watts. The display format can
be configured in the Set home submenu of the Setup menu.
Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format
can be configured in the Set home submenu of the Setup menu.
Diagnostic indicators
The diagnostic indicators on the system front panel display error status during system startup.
NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it
into a working power source and press the power button.
Icon Description Condition Corrective action
Health
indicator
If the system is on, and in
good health, the indicator
lights solid blue.
None required.
The indicator blinks amber if
the system is on or in
standby, and if any error
exists (for example, a failed
fan or hard drive).
See the System Event Log or system
messages for the specific issue. For more
information on error messages, see the Dell
Event and Error Messages Reference Guide
at dell.com/esmmanuals.
Invalid memory configurations can cause
the system to halt at startup without any
video output. See Getting help.
Hard-drive
indicator
The indicator blinks amber if
a hard drive experiences an
error.
See the System Event Log to determine the
hard drive that has an error. Run the
appropriate Online Diagnostics test. Restart
system and run embedded diagnostics
(ePSA). If the hard drives are configured in a
RAID array, restart the system and enter the
host adapter configuration utility program.
Electrical
indicator
The indicator blinks amber if
the system experiences an
electrical error (for example,
voltage out of range, or a
failed power supply or
voltage regulator).
See the System Event Log or system
messages for the specific issue. If it is due to
a problem with the power supply, check the
LED on the power supply. Re-seat the
power supply by removing and reinstalling
it. If the problem persists, see Getting help.
Temperatur
e indicator
The indicator blinks amber if
the system experiences a
thermal error (for example, a
temperature out of range or
fan failure).
Ensure that none of the following
conditions exist:
A cooling fan is removed or has failed.
System cover, cooling shroud, EMI filler
panel, memory-module blank, or back-
filler bracket is removed.
16
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 154 155

Comments to this Manuals

No comments