Dell R430 Owner's Manual download pdf (Page 49)

Removing the front bezel

1. Unlock the keylock at the left end of the bezel.

2. Lift the release latch next to the keylock.

3. Rotate the left end of the bezel away from the front panel.

4. Unhook the right end of the bezel and pull the bezel away from the system.

Removing and installing the system cover

WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not

attempt to lift the system by yourself.

WARNING: Installing or removing the system cover when the system is on may expose you to a

risk of electric shock.

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

CAUTION: Do not operate the system without the cover for a duration exceeding five minutes.

Removing the system cover

Prerequisites

1. Ensure that you read the Safety instructions.

2. Turn off the system, including any attached peripherals.

3. Disconnect the system from the electrical outlet and peripherals.

4. If installed, remove the front bezel.

Steps

1. Turn the latch release lock to the unlock position.

2. Lift the latch and rotate the latch toward the back of the system.

The system cover slides back disengaging the tabs on the system cover from the slots on the chassis.

3. Hold the cover on both sides, and lift the cover away from the system.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 154 155

No comments

Dell R430 Owner's Manual Page 49