Dell R430 Owner's Manual download pdf (Page 84)

NOTE: Ensure that the expansion card is properly seated along the chassis, so that expansion-

card latch can be closed.

5. If applicable, connect cables to the expansion card.

6. Install the expansion card-riser on the system board.

Next steps

Follow the procedure listed in After working inside your system.

Related Links

Removing the expansion-card riser

Installing the expansion-card riser

iDRAC ports card (optional)

The iDRAC ports card consists of the SD vFlash card slot and an iDRAC port. The iDRAC ports card is used

for advanced management of the system.

An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the system. It

provides persistent on-demand local storage and a custom deployment environment that allows

automation of server configuration, scripts, and imaging. It emulates USB device(s). For more information,

see the Integrated Dell Remote Access Controller User's Guide at dell.com/esmmanuals.

Removing the iDRAC port card

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only

perform troubleshooting and simple repairs as authorized in your product documentation, or as

directed by the online or telephone service and support team. Damage due to servicing that is

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions

that came with the product.

1. Ensure that you read the Safety instructions.

2. Follow the procedure listed in Before working inside your system.

3. Disconnect any cables connected to the iDRAC port card.

4. If installed, remove the expansion-card riser.

Steps

1. Loosen the two screws securing the iDRAC port card holder to the system board.

2. Pull the iDRAC port card to disengage it from the connector and remove the card from the chassis.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 154 155

No comments

Dell R430 Owner's Manual Page 84