Dell PowerConnect W-AirWave 7.6 User Manual download pdf (Page 39)

Static Routes

On the AMP Setup > Network page, locate the Static Routes area. This section displays network, subnet mask, and

gateway settings that you have defined elsewhere from a command-line interface.

NOTE: This section does not enable you to configure new routes or remove existing routes.

What Next?

l Go to additional tabs in the AMP Setup section to continue additional setup configurations. The next section

describes AirWave roles.

Complete the required configurations in this chapter before proceeding.

Dell support remains available to you for

any phase of AMP configuration.

Creating AirWave Users

AirWave installs with only one AirWave user—the admin, who is authorized to perform the following functions:

l Define additional users with varying levels of privilege, be it manage read/write or monitoring.

l Limit the viewable devices as well as the level of access a user has to the devices.

Each general user that you add must have a user name, a password, and a role. Use unique and meaningful user

names as they are recorded in the log files when you or other users make changes in AirWave.

NOTE: Username and password are not required if you configure AirWave to use RADIUS, TACACS, or LDAP authentication. You do

not need to add individual users to the AirWave server if you use RADIUS, TACACS, or LDAP authentication.

The user role defines the user type, access level, and the top folder for that user. User roles are defined on the AMP

Setup > Roles page. Refer to the previous procedure in this chapter for additional information, "Creating AirWave

User Roles" on page 29.

The admin user can provide optional additional information about the user, including the user's real name, email

address, phone number, and so forth.

Perform the following steps to display, add, edit, or delete AirWave users of any privilege level. You must be an

admin user to complete these steps.

1. Go to the AMP Setup > Users page. This page displays all users currently configured in AirWave. Figure 16

illustrates the contents and layout of this page.

Figure 16: AMP Setup > Users Page Illustration

2. Select Add to create a new user, select the pencil icon to edit an existing user, or select a user and select Delete

to remove that user from AirWave. When you select Add or the edit icon, the Add User page appears, illustrated

in Figure 17.

NOTE: A current user cannot change his/her own role. The Role drop-down field is disabled to prevent this.

Dell PowerConnect W-AirWave 7.6 | User Guide Configuring AirWave | 27

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 331 332

No comments

Dell PowerConnect W-AirWave 7.6 User Manual Page 39