Dell 1000W User's Guide Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 135
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
58
|
Configuring the Software
1 Enter the applicable pager settings:
Parameter Description
Modem Port Select the communication port that is being used by the modem.
Access Number Some pager services require a delay between dialing the access number and the
message code. The Access Number is the station number that the pager joined
(which can only be an auto station). The waiting time is the delay time between
dialing the paging station number and the pager number; the delay time is set by
the paging station. For example, the Liantong 192 auto station requires a one
second delay.
Pager Number Some pager services require a delay between dialing the pager number and the
message code. The Pager Number is the number of the pager that accepts the
communication. The wait time is the delay time between dialing the pager number
and the message code (paging message content); the delay time is set by the paging
station. For example, the Liantong 192 auto station requires a one second delay.
Dialing number to external
line
For an external line, dial a specified number and delay a specified time to access
the external line. If the external line phone number cannot be dialed directly, add
the switch number in the Dialing to external line field. The wait time after dialing
can be set as needed, generally one second.
Dialing number after
message
Some pager services require a specific number to end the message code.
2 Dell recommends testing the pager function by clicking the Test button. The software sends a test
page (000) to the specified recipient.
NOTE:
You can select the event messages from the Pager Setting window or from the Event Action
window.
3 Select the Event Code check boxes for the event messages to be sent (see Figure 58). Only these
events can be configured: UPS Input Power Failure, UPS Battery Low, UPS Hardware Failure, and
UPS Output Overload.
If the selected event occurs, the software sends the event code to the pager. The event code
displays on the pager.
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 134 135

Comments to this Manuals

No comments