60
|
Configuring the Software
Resetting the Dell UPS Sensor Values
Select UPS Control Parameters from the UPS menu. The UPS Control Parameters window opens
(see Figure 59).
NOTE:
If the UPS Control Commands from Serial Port setting is disabled, configuration and load control
commands are restricted to the LCD only. This setting must be enabled from the LCD before you can select UPS
Control Parameters.
Figure 59. UPS Control Parameters Window
To reset the sensor values:
1 Select the check box for the options to reset:
S Reset Peak Consumption Watts
S Reset Cumulative Consumption Watts
S Reset Peak Headroom Watts
2 Click OK.
The sensor values clear, and the date and time stamp for the statistic resets to the current date and
time.
Comments to this Manuals