Dell PowerEdge SC1435 User Manual download pdf (Page 52)

52 Installing System Components

Figure 3-10. Installing and Removing the Processor

Open the processor shield and then lift the processor out of the socket. Leave the release lever up so

that the socket is ready for the new processor.

NOTICE: Be careful not to bend any of the pins on the LGA socket when removing the processor. Bending the pins

can permanently damage the socket and system board.

Installing a Processor

Unpack the new processor.

2 Align the

rocessor with the

socket keys on t

he ZIF socket

. See Figure 3-10.

If you are adding a second processor to an empty socket, perform the following steps:

Remove the protective cover from the processor socket. See Figure 3-10.

Pull the socket-release lever 90 degrees upward. See Figure 3-10.

Lift the processor shield. See Figure 3-10.

1 processor shield 2 socket cover (remove before

adding second processor)

3 socket-release lever

4 processor 5 ZIF socket 6 socket key (2)

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 131 132

No comments

Dell PowerEdge SC1435 User Manual Page 52