Dell OptiPlex 170L Specifications Page 103

  • Download
  • Add to my manuals
  • Print
  • Page
    / 143
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 102
Back to Contents Page
Control Panel
Dell™OptiPlex™170LUser'sGuide
Removing the Control Panel
Replacing the Control Panel
Removing the Control Panel
1. Follow the procedures in "Before You Begin."
2. Disconnect the control panel cable from the connector on the system board.
3. Press the control panel lever to release the panel from the notch on the computer.
Replacing the Control Panel
1. Follow the procedures in "Before You Begin."
2. Insert the control panel tab into the notch on the chassis.
3. Ensure that the control panel lever is secured by the tab on the chassis.
4. Connect the control panel cable to the connector on the system board.
CAUTION: Before you begin this procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Before you disconnect a device from the computer or remove a component from the system board, verify that the standby power light on the
system board has turned off. To locate the light, see "System Board Components."
1
control panel
2
control panel lever
3
notch
4
system board connector
Page view 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 142 143

Comments to this Manuals

No comments