1. Insert the memory key into a USB port and restart the computer.
2. When F12 = Boot Menu appears in the upper-right corner of the screen, press <F12>.
The BIOS detects the device and adds the USB flash option to the boot menu.
3. From the boot menu, select the number that appears next to the USB device.
The computer boots to the USB device.
Floppy Drive
1. Disable the integrated floppy controller by entering system setup, going to integrated devices, and setting the diskette interface to Off.
2. Make sure that under Drive Configuration, Diskette Drive A is set to 3.5 inch, 1.44 MB.
3. Connect the USB floppy drive, insert a bootable diskette, and reboot the system.
Power Button
You can use the ACPI feature to configure the function of Windows 2000 and Windows XP operating systems.
Power Button Functions With ACPI Enabled
Power Button Functions With ACPI Disabled
Power Management
NOTE: Pressing or holding the power button to shut down
the computer may result in data loss. Use the power button
to shut down the computer only if the operating system is
not responding.
NOTE: Pressing or holding the power button to shut down
the computer may result in data loss. Use the power button
to shut down the computer only if the operating system is
not responding.
Comments to this Manuals