Dell Precision Workstation 350 Technical Information download pdf (Page 30)

3. Attach the power and floppy-drive cables to the floppy drive.

4. Connect the other end of the floppy-drive cable to the connector labeled "FLOPPY" on the system board.



5. If you are installing a new floppy drive rather than replacing a drive, remove the front-panel inserts.

6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

7. Close the computer cover.



8. Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

9. Enter system setup and update the appropriate Diskette Drive A option to reflect the size and capacity of your new floppy drive.

10. Verify that your computer works correctly by running the Dell Diagnostics.

Removing a CD/DVD Drive



1. Disconnect the power, audio, and CD/DVD drive cables from the back of the drive.



power cable

floppy-drive cable

floppy-drive connector

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

No comments

Dell Precision Workstation 350 Technical Information Page 30