Dell Precision Workstation 350 Technical Information download pdf (Page 39)

System-Board Jumper Settings



Removing the System Board



1. Remove any components that restrict access to the system board.

2. Disconnect all cables from the system board.

3. Before you remove the existing system board, visually compare the replacement system board to the existing system board to make sure that you have

the correct part.

4. Pull up on the tab and slide the system board toward the front of the computer, and then lift it up and away.

Removing the System Board



5. Place the system board that you just removed next to the replacement system board.

Replacing the System Board

Jumper

Setting

Description

PSWD

(green jumper)

(default)



Password features are enabled.

Password features are disabled.

CLR_CMOS



Clears the CMOS settings

jumpered unjumpered

CAUTION: Before you remove any component from the system board, see "Before You Begin."

NOTE: The system board and metal tray are attached and are removed as one piece.

1 2 ... 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Dell Precision Workstation 350 Technical Information Page 39

Comments to this Manuals

Related products and manuals for Networking Dell Precision Workstation 350