Dell C1760NW Color Laser Printer User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 240
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Connecting Your Printer 33
Manual SSID Setup
NOTE: A Password is required to enter Admin Menu when Panel Lock Set is set to Enable. In this case, enter
the password you specified, and press
the
(Set) button.
1
Press the
(Menu)
button.
2
Press the button until
Admin Menu
appears, and then press the
(Set)
button.
3
Press the button until
Network
appears, and then press the
(Set)
button.
4
Press the button until
Wireless Setup
appears, and then press the
(Set)
button.
5
Press the button until
Manual Setup
appears, and then press the
(Set)
button.
6
Enter the SSID, and then press the
(Set)
button.
7
Select the network mode from
Infrastructure
and
Ad-hoc
depending on your environment, and then press
the
(Set)
button.
If you select
Infrastructure
, proceed to step 8.
If you select
Ad-hoc
, proceed to step 9.
8
Select the encryption type from
No Security
,
Mixed mode PSK
,
WEP
,
WPA-PSK-TKIP
, or
WPA2-PSK-
AES
.
If you do not set security for your wireless network:
•Press the
button until
No Security
appears, and then press the
(Set)
button.
To use Mixed mode PSK, WPA-PSK-TKIP, or WPA2-PSK-AES encryption:
a
Press the button until
Mixed mode PSK
,
WPA-PSK-TKIP
, or
WPA2-PSK-AES
appears, and then
press the
(Set)
button.
b
Enter the passphrase, and then press the
(Set)
button.
NOTE: A passphrase is an encryption key for WPA and WPA2 encryption which consists of 8 to 63 alphanumeric
characters. It may be described as a key on some access points or routers. For details, refer to the manual supplied with
the access point or router.
To use WEP encryption:
a
Press the button until
WEP
appears, and then press the
(Set)
button.
b
Enter the WEP key, and then press the
(Set)
button.
c
Press the button to highlight the desired transmit key from
Auto
or
WEP Key 1
to
WEP Key 4
, and
then press the
(Set)
button.
Proceed to step 10.
9
Select the encryption type from
No Security
or
WEP
.
If you do not set security for your wireless network:
Ensure that
No Security
appears, and then press the
(Set)
button.
To use WEP encryption:
a
Press the button until
WEP
appears, and then press the
(Set)
button.
b
Enter the WEP key, and then press the
(Set)
button.
c
Press the button to highlight the desired transmit key from
WEP Key 1
to
WEP Key 4
, and then press
the
(Set)
button.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 239 240

Comments to this Manuals

No comments