Removing the Used Retard Roller in the Standard 250-Sheet Tray
1. Pull the standard 250-sheet tray out of the printer carefully. Hold the tray with both hands, and remove it from the printer.
2. By holding the retard roller tabs with your fingers, pull the retard roller out of the groove in the axle.
Installing the New Retard Roller in the Standard 250-Sheet Tray
1. Align the new retard roller to the groove on the axle.
2. Insert the retard roller into the axle till it snaps fit so the protrusions fit completely into the slots and the roller hook reseats into the groove on the axle.
Comments to this Manuals